In the menu “Settings” you can define different basic settings for the locks (e.g. default Fast Locking
time, default Time Lock Delay, etc.) and set the input unit (e.g. dialog language, volume, etc.). The following tables provide an overview of the functions and where they can be set.
| Settings Locks | Door Lock 1 | Other Door Locks | Inner Compartment Locks |
|---|---|---|---|
| Required Code | MA or TC1 | MA... or TC... | MA... or TC... |
| Duress Code | ✓* **** | --- | --- |
| Fast Locking | ✓* | --- |
|
| Time Lock Delay | ✓* | --- | --- |
| Date/Time ormat | ✓* | --- | --- |
| Lock Period End | ✓* | --- | --- |
| Locking Mode | ✓ | --- | --- |
| Parallel Mode | ✓* *** | --- | --- |
| Dual Mode | ✓ ** | ✓ ** | ✓ ** |
| Max Open Period | ✓ - | --- | --- |
* Settings are valid for the entire locking system
** Setting can be set individually for each lock
*** The Parallel Mode can only be enabled and disabled when all individual codes are reset to the factory setting.
**** Important: With the AS384 Management-Suite Software, the structure of the Duress Code can be modified. As standard, the Duress Code is activated and set to opening code+3.
| Setting Input Unit | Required Mode |
|---|---|
| Language | No code needed |
| Volume | MA1 (Master Code lock 1) |
| Lighting | No code needed |
| Contract | No code needed |
| Battery Compartment Content | MA1 (Master code lock1) |