With the function Summer/Winter Time, you can set, change, and delete the start and end of summer time.
– Ex factory the Summer/Winter Changeover is enabled and set to time zone rule MESZ.
– The Summer/Winter Changeover can only be defined in the settings for lock 1 and is valid for the entire locking system.
– If "manual" mode is activated the Summer/Winter Changeover must be adjusted each year to the corresponding changeover data.
– The Summer/Winter Changeover must be set at least 1 hour before it takes place.
– A change from automatic to manual Summer/Winter Changeover cannot be switched back any longer. A switch back is possible only by resetting the lock system.
AS384 AS384 Management-Suite Software
In Extended Mode of the locking system, the Summer/Winter Changeover Time can be defined with the AS384 Management-Suite Software, by means of time zone rules or by fixed dates and times for the start and end of summer time.
Authorization: Master Code “MA1”, Time Code “TC1”
Requirement: System status “Unlocked” (door locks and door bolt open)
To set, change or delete Summer/Winter Changeover Time, proceed as follows:
| 1. Wake up display (if necessary) and access menu. | ||
| 2. Select and confirm the menu option “Time Functions” | ||
| 3. Select and confirm menu option “Time Functions Lock 1”. | ||
| 4. Enter and confirm Master Code (or Time Code) of lock 1. | ||
| To Set the Summer/Winter Changeover Time, proceed to step 5. To Change the Summer/Winter Changeover Time, proceed to step 9. To Delete the Summer/Winter Changeover Time, proceed to step 14. | ||
Setting (Enabling) the Summer/Winter Changeover Time | ||
| 5. Select and confirm the menu option “Time Functions L1 Other” | ||
| 6. Select and confirm menu option “Other L1 DLST” | ||
| 7. Set and confirm date and time for the start of the selected summer time. | ||
| 8. Set and confirm date and time for the end of the selected summer time. | ||
|
The settings have been stored. The set dates for the summer/winter time changeover are displayed. |
||
Changing the Summer/Winter Changeover Time | ||
| 9. Select and confirm menu option “Time Functions L1 DLST” | ||
| 10. Confirm display with the set dates for the summer/winter time changeover. | ||
| 11. Select and confirm menu option “Change” | ||
| 12. Set and confirm new week day and/or new time for the start of the selected summer time. | ||
| 13. Set and confirm new week day and/or new time for the end of the selected summer time | ||
|
The changed Summer/Winter Changeover Time is stored. The set dates for the Summer/Winter Changeover Time are displayed. |
||
Deleting (Disabling) Summer/Winter Changeover Time | ||
| 14. Select and confirm menu option “Time Functions L1 DLST”. | ||
| 15. Confirm display with the set dates for the summer/winter time changeover. | ||
| 16. Select and confirm menu option “Delete” | ||
| 17. Confirm deletion. | ||
|
The Summer/Winter Time Changeover is deleted or disabled. The input unit returns to the menu option “Time functions S1 DLST” |
||