With the function Return Lock, you can specify how long the safe/inner compartment can not be opened after each closing. If the Return Lock is activated (time 0), the Return Locking period starts to run as soon as the locks are closed. The safe can not be opened again until the Return Lock period has elapsed.
– Setting range of Return Lock [mm]:
000 Return Lock disabled
001 to 240 1 minute to 240 minutes
– The Return Lock is disabled (set to “00:00”) on delivery.
– The Return Lock can be defined for door lock 1, the last door lock (only with activated Partial Locking), as well as all inner compartment locks.
Authorization: Master Code, Time Code
Requirement: System status “Unlocked” (door locks and door bolt open)
To set or disable the Return Lock, proceed as follows:
| 1. Wake up display (if necessary) and access menu. | ||
| 2. Select and confirm the menu option “Time Functions” | ||
| 3. Select and confirm menu option time functions of the desired lock (e.g. time functions lock 1). | ||
| 4. Enter and confirm Master Code (or Time Code) of the selected lock. | ||
| 5. If the Return Lock is disabled, select and confirm the menu option “Time Functions L1 Other” | ||
| 6. Select and confirm menu option “Other L1 Non-Return TD” or “Time Functions L1 Non-Return TD”. | ||
7. Enter and confirm Return Lock Period (mm.ss). Note: If you want to disable the Return Lock, enter “00.00”. | ||
The defined Return Locking Period is stored. The input unit returns to the menu option “Time Functions L1 Non-Return TD”. You can now configure other time functions or return to the standard mode display. | ||