Paxos - Setting/Disabling Duress Delays

With the function Duress Delay, you can define how long the opening of the respective lock (door lock 1, last door lock (with Partial Locking) or inner compartment lock) is delayed by entering a Duress Code.

– Setting range Duress Delay [mm:ss]: 
   00:00                          Duress Delay is disabled 
   00:01 to 99:59            1 second to 99 minutes and 59 seconds 

– The Duress Delay is disabled (set to “00:00”) on delivery. 

– The Duress Delay can be defined for door lock 1, the last door lock (only with activated Partial Locking) as well as all inner compartment locks. 

AS384 AS384 Management-Suite Software 

In the Extended Mode of the locking system with code format “PIN only” or “ID+PIN”, the AS384 Management-Suite Software can also be used to define Time-Dependent Duress Delays. During the specified time, the Time-Dependent Duress Delay overrides the default Duress Delay. In the Extended Mode of the locking system with code format “ID+PIN”, the AS384 ManagementSuite Software can also be used to define Code-Related Duress Delays. The code-related Duress Delays override the default Duress Delay. 

Authorization: Master Code, Time Code 

Requirement: System status “Unlocked” (door locks and door bolt open) .

To set or disable the Duress Delay, proceed as follows:

1. Wake up display (if necessary) and access menu.
2. Select and confirm the menu option “Time Functions”.
3. Select and confirm menu option time functions of the desired lock (e.g. time functions lock 1).
4. Enter and confirm rm Master Code (or Time Code) of the selected lock.
5. If the Duress Delay is disabled, select and confirm the menu option “Time Functions L1 Other”.
6. Select and confirm menu option “Other L1 Duress Time Delay” or “Time Functions L1 Duress Time Delay”.
7. Enter and confirm Duress Delay (mm.ss).  Note: If you want to disable the Duress Delay, enter “00.00”
The setting is stored.  The input unit returns to the menu option “Time Functions L1 Duress Time Delay”. You can now configure other time functions or return to the standard mode display.