The Weekly Locking Periods allow the definition of locking periods for weekly recurring events (e.g., locking outside of business hours).
– A maximum of 28 Weekly Locking periods can be set.
– Setting range of Weekly Locking Period: 1 Minute to 6 days 23 hours and 45 minutes.
– Weekly Locking Periods do not expire. If a Weekly Locking Period is no longer needed, it must be deleted.
– The maximum duration of a Weekly Locking Period is limited to 6 days, 23 hours and 45 minutes.
– The minimum duration for a Weekly Locking Period is limited to 1 minute.
– The minimum time interval between two Weekly Locking Periods is calculated automatically by the system, based on:
Opening Delay time (or the Duress Delay if greater) + confirmation time + 1 minute.
Without Opening Delay time the minimum time interval is 15 minutes.
If the minimum time interval of the input is lower, an error message appears.
– Weekly Locking Periods are stored in the Weekly Locking Period list in chronological order.
– Weekly Locking Periods have no eff ect during an active Holiday Locking Period – Holiday Locking Periods override Weekly Locking Periods.
– Weekly Locking Periods can only be changed or deleted as long as they have not started.
Authorization: Master Code “MA1”, Time Code “TC1”
Requirement: System status “Unlocked” (door locks and door bolt open)
To set, change, or delete existing Weekly Locking Periods, proceed as follows:
| 1. Wake up display (if necessary) and access menu. | ||
| 2. Select and confirm the menu option “Time Functions”.v | ||
| 3. Select and confirm menu option “Time Functions Lock 1”. | ||
| 4. Enter and confirm Master Code (or Time Code) of lock 1. | ||
| To Set a New Weekly Locking Period, continue with step 5. To Change an Existing Weekly Locking Period, continue with step 10. To Delete an Existing Weekly Locking Period, continue with step 15. | ||
Setting a New Weekly Locking Period | ||
| 5. If no Weekly Locking Periods have been configured yet, select and confirm the menu option “Time Functions L1 Other”. | ||
| 6. Select and confirm menu option “Other L1 Weekly” or “Time Functions L1 Weekly”. |
|
|
| 7. Select and confirm next unassigned Weekly Locking Period (e.g. Weekly Locking Period 02). | ||
| 8. Set and confirm date and time for the start of the selected Weekly Locking Period. | ||
| 9. Set and confirm date and time for the end of the selected Weekly Locking Period. | ||
|
The Weekly Locking Period is stored. The input unit returns to the menu option “Time Functions L1 Weekly”. You can now configure additional Weekly Locking Periods (repeat steps 6 to 9) or return to the standard mode display. |
||
Changing a Weekly Locking Period | ||
| 10. Select and confirm menu option “Time Functions L1 Weekly”. | ||
| 11. Select and confirm desired Weekly Locking Period. | ||
| 12. Select and confirm menu option “Change”. | ||
| 13. Set and confirm new date and/or new time for the start of the selected Weekly Locking Period. | ||
| 14. Set and confirm new date and/or new time for the end of the selected Weekly Locking Period. | ||
|
The changed Holiday Locking Period is stored. The input unit returns to the menu option “Time Functions L1 Weekly”. You can now configure additional Weekly Locking Periods (repeat steps 10 to 14) or return to the standard mode display. |
||
Deleting Weekly Locking Periods | ||
| 15. Select and confirm menu option “Time Functions L1 Weekly”. | ||
| 16. Select and confirm the Weekly Locking Period you want to delete. | ||
| 17. Select and confirm menu option “Delete”. | ||
| 18. Confirm deletion. | ||
|
The Weekly Locking Period is deleted. The input unit returns to the menu option “Time Functions L1 Weekly”. You can now delete additional Weekly Locking Periods (repeat steps 15 to 18) or return to the standard mode display. |
||