Authorization: Master Code “MA1”, Time Code “TC1”
Requirement: System status “Unlocked” (door locks and door bolt open)
To set the current date and time, proceed as follows:
– The corresponding days of the week and leap years are automatically determined using the built-in calendar function (calendar section: Jan-1-2010 to Dec-31-2099). Therefore, it is important that the current date and time are set correctly.
– The current date and time have validity for the entire system.
– Please observe the notes in section 5.4.2.4 (Setting the date and time format“) for setting the date and time formats.
AS384 Management-Suite Software
In Extended Mode, the following can be executed with AS384 Management-Suite Software:
– The date and time can be automatically synchronized with the computer clock.
– The summer/winter time changeover can be controlled using the time zone rules or a unique time stamp (beginning and end).
To set the current date and time, proceed as follows:
| 1. Wake up display (if necessary) and access menu. | ||
| 2. Select and confirm the menu option “Time Functions”. | ||
| 3. Select and confirm menu option “Time Functions Lock 1”. | ||
| 4. Enter and confirm Master Code (or Time Code) of lock 1. | ||
| 5. Select and confirm the menu option “Time Functions L1 Date/Time”. | ||
6. Set and confirm the current date and current time. Note: The input format is dependent on the selected date/time format (see "Setting the date and time format"). | ||
The entered date is stored. The input unit returns to the menu option “Timer functions Date/Time”. | ||