Changing codes: Existing codes can only be changed or deleted by the code holder, the Master
Code or the Mutation Code.
AS384 Management-Suite Software
In Extended Mode of the locking system with code format ID+PIN, other codes, in addition to the Master Code and Mutation Codes, can also be assigned the right to change and delete foreign codes, by using the AS384 Management-Suite Software.
Authorization: Code holder (only code change), Master Code, Mutation Code
Requirement: System status “Unlocked” (door locks and door bolt open)
To modify or delete existing codes, proceed as follows:
| 1. Wake up display (if necessary) and access menu. | ||
| 2. Select and confirm the menu option “Code functions”. | ||
| 3. Select and confirm the desired lock (e.g. lock 1). | ||
| 4. Select desired code (e.g. “OCc1”) that you want to change or delete and confirm selection. | ||
|
To Change a Code, proceed to step 5. To Delete a Code, proceed to step 10. | ||
Changing Codes | ||
| 5. Select and confirm desired code function (e.g. code function Time Code). | ||
| 6. Enter and confirm old Code (or Master Code or Mutation Code) for the selected lock. | ||
|
7. Enter and confirm new individual code Note: If a code is changed to “10203040” (factory code), it is automatically deleted. |
||
| 8. Enter and confirm again new code. | ||
| The new code is stored. | ||
| 9. Repeat steps 5 through 8 for all codes of the selected lock that you want to change. | ||
Delete a Code | ||
| 10. Select and confirm menu option “Delete”. | ||
| 11. Enter and confirm old Code (or Master Code or Mutation Code) for the selected lock. | ||
| 12. Confirm deletion of code. | ||
| The selected code is deleted. | ||
| 13. Repeat steps 10 through 12 for all codes of the selected lock that you want to delete. | ||