Setting New Codes
Setting the Opening Code OCa.., OCb.. and Master Code
To use all the functions of the locking system, for each door and inner compartment lock at least the Opening Codes OCa.. and OCb.. and the Master Code MA must have been activated by assigning an individual code. The procedure described below is based on a system that has been addressed, but to which individual codes have not been assigned yet.
Authorization: Opening Code OCa with factory code “10203040”
Requirement: System status “Unlocked” (door locks and door bolt open)
To activate with individual codes the Opening Codes OCa.. and OCb.. and the Master Code MA., proceed as follows:
| ||
| 2. Select and confi rm the menu option “Code functions”. | ||
| 3. Select and confirm the desired lock (e.g. lock 1). | ||
| Defining the Opening Code OCa | ||
| 4. Confirm code function Opening Code OCa. | ||
| 5. Select and confirm menu option “Change”. | ||
| 6. Enter and confirm factory code “10203040” (or "0010203040" with ID+PIN mode). | ||
| 7. Enter and confirm new individual Opening Code OCa for the selected lock. | ||
| 8. Enter and confirm again the specified Opening Code OCa for the selected lock. | ||
| The new Opening Code OCa is stored. | ||
| Defining the Opening Code OCb | ||
9. Select and confirm menu option “Inactive Codes”. Note: All not yet activated codes are on the sub-menu “Inactive | ||
| 10. Confirm code function Opening Code OCb. | ||
| 11. Enter and confirm the individual Opening Code OCa entered in steps 7 and 8. | ||
| 12. Enter and confirm individual Opening Code OCa for the selected lock. | ||
| 13. Enter and confirm again the defi ned Opening Code OCa for the selected lock. | ||
| The new Opening Code OCb is stored. | ||
| 14. Confirm code function Master Code. | ||
| 15. Enter and confirm the individual Opening Code OCa entered in steps 7 and 8. | ||
| 16. Enter and confirm rm new individual Master Code for the selected lock. | ||
| 17. Enter and confirm again the defined Master Code for the selected lock. | ||
| The new Master Code is stored. Once the Master Code is stored, new codes for the corresponding lock can only be created by the holder of the Master Code. | ||
| 18. Repeat steps 3 to 17 for all door and safe locks. | ||