The function “Fast Locking” allows the immediate activation of a locking period. After closing, the lock can not be opened until the pre-defi ned time has elapsed.
Example: For shorter business hours before public holidays, this allows bridging the time until the
start of regular locking periods. Fast Locking can be enabled both in the Unlocked and Secured menu.
Authorization: Any code from lock 1 (except disabled codes)
Requirement:
System status ‘Unlocked’ (door locks and door bolt open) or system status “Secured” (door locks and door bolt closed) as well as activated "Fast Locking" function (see section 5.4.2.2 "Setting Fast Locking times").
Fast Locking is not based on the date/time setting. Therefore, Fast Locking cannot be bypassed by changing the date/time setting after activation.
The menu option Fast Locking appears only if the Fast Locking function is enabled in the settings
for lock 1 (Fast Locking time > 0 hours). Ex factory Fast Locking is set to 000, i.e. deactivated.
To activate Fast Locking, proceed as follows:
| 1. Wake up display (if necessary) and access the menu. | ||
| 2. Select and confirm the menu option “Imm. Time Lock”. | ||
| 3. Enter and confi rm a valid code for door lock 1. | ||
| 4. Adjust and confi rm the fast locking time. Setting range: 000:01...144.00 (hhh:mm) | ||
| 5. The secure storage door and door bolt close. The door locks close automatically or after confirmation of the locking process (see section 4.6.2 "Closing the door locks"). | ||
After return to standard mode display, the status indicator shows that a locking period is active. The door locks cannot be opened until the locking time has elapsed. The date and time of the end of the locking time are displayed. By briefly pressing the <CLR> key or by pressing the dial knob >1.5 seconds, the current date and current time are displayed for about 5 seconds. | ||