Paxos Code Input/Error Messages When Entering the Code

Code Input
The opening of the locks and all security-relevant configuration settings of the locking system Paxos advance are protected from unauthorized access by codes (formed from digits 0 to 9). The locking system Paxos advance recognizes five different types of code (master code, mutation code, time code, net code, and port code) with different access rights (see section 5.2 "Code functions").

In the following, the general procedure for entering the code from the keypad input unit and the
dial knob input unit is shown (8-digit unlocking code for lock 1 “13617689” is to be entered).

Keypad Input Unit		Dial Knob Input Unit
			Random number for the digits 1 and 2 of the code is displayed.
				Change random number by turning the dialling knob to the value of the digits 1 and 2 of the code and then confirm by pressing the knob.
			Random number for the digits 3 and 4 of the code is displayed.
				Change random number by turning the dialling knob to the value of the digits 4 and 4 of the code and then confi rm by pressing the knob.
			Random number for the digits 5 and 6 of the code is displayed.
				Change random number by turning the dialling knob to the value of the digits 5 and 6 of the code and then confirm by pressing the knob.
			Random number for the digits 7 and 8 of the code is displayed.
				Change random number by turning the dialling knob to the value of the digits 7 and 8 of the code and then confirm by pressing the dial knob.

Error Messages During Code Input

	Code too short - This message appears when the code that you have entered has less than 8 digits. Re-enter a valid code.
	Entry deleted - This message appears when you have aborted the code input with the <CLR> key or by pressing the dial knob >1.5 seconds. Re-enter a valid code.
	Wrong code - This message appears when you have entered an invalid code. Re-enter a valid code.
	Code not authorized - This message appears when you have entered a valid code but you have no rights for the respective task. Re-enter a valid code for the respective task.