|
The door locks are unlocked, and the boltwork is open. By briefly pressing the <ENTER> key or briefly pressing the dial knob you can access the user menu “Unlocked”. |
|
| The door locks are open and the boltwork is closed. After opening the door locks, the message “Locks are open, open bolt” appears for about 5 seconds. Then, a sound signal and the message “Open bolt” indicate that you should open the boltwork. If the boltwork is not opened within a certain time, the door locks will be closed automatically (with “Locking mode Automatic“) or the message “Close with ENTER“ appear (with “Locking mode Manual“). |
|
| The safe door is partly locked. The last door lock and boltwork are closed. By briefly pressing the <ENTER> key or briefl y pressing the dial knob you can access the user menu “Secured”. |
|
| The boltwork and the door locks are closed. By briefly pressing the <ENTER> key or briefly pressing the dial knob you can access the user menu “Secured”. |
|
| The locking system is locked via one of the locking time functions (e.g. fast locking). The door locks cannot be opened until the locking time has expired. The date and time of the end of the locking time are displayed. By briefly pressing the <CLR> key or by pressing the dial knob >1.5 seconds, the current date and current time are displayed for about 5 seconds. |
|
| The locking system has not been addressed yet. If this message is displayed, the locking system must first be addressed before it can be used. Please refer to the instructions in the Paxos Advanced Installation Instructions. |
|
|
The battery compartment has been opened since the last operation. The system is locked. Confirm this message by pressing the key <ENTER> key and briefly pressing the dial knob. Enter a valid code for lock 1 and confirm the code (see section 4.4 "Code input/error messages when entering the code"). The locking system is then released again. |
|
| This message appears if the battery compartment is open while waking up the input unit. Insert the battery compartment. | |
| This message appears when the function Maximum Open Period is enabled and the specified maximum open time of the secure storage door has been exceeded. Close the secure storage door. | |
| The locking system is locked via the remote lock function. The door locks can not be opened until the remote locking is deactivated again. | |