The display of the input unit switches automatically off after 15 seconds without action. To
wake up the display, press any key on the keypad input unit or press briefl y the knob of the dial
knob input unit.
Assuming the locking system has been put into operation and addressed properly (see installation
instructions), the standard operating mode display appears after waking up the input unit.
In the standard mode display, the current date, current time, and the current status of the locking
system is shown (e.g. state “Secured”).
- If another status message is displayed, please follow the instructions in section 4.3 "Status messages
in the standard mode display".
- If the display remains blank or an error message is displayed, please follow the instructions in
section 8 "Operating errors".