E-Plex 5000 Series Templates and Instructions |
Templates
| Template ID | Description | Last Updated |
| PKG3091 | E-Plex 5x00 Series Template 1.25 Mortise | 05/2015 |
| PKG3134 | E-Plex 5x00 Series Template 1 Mortise | 11/2006 |
| TEM1007 | E-Plex 5x00 Template Cylindrical | 03/2012 |
| PKG3095 | E-Plex 5x00 Series Door Prep Template Mortise | 11/2006 |
| PKG3057 | E-Plex 5x00 Series Exit Template | 01/2011 |
| KAA1179 | E-Plex 5x70 Template Controller | 08/2008 |
| PKG3139 | E-Plex 5x86 Series Installation Template Entry/Exit | 03/2003 |
Instructions
| Document ID | Description | Last Updated |
| PKG3090 | E-Plex 5x00 Series Installation Instructions 1.25 Mortise | 08/2012 |
| PKG2992 | E-Plex 5x00 Series Installation Manual Cylindrical | 08/2022 |
| PKG3239 | E-Plex 5x70 Installation Instructions Controller | 03/2014 |
| PKG3138 | E-Plex 5x86 Installation Instructions | 07/2009 |
| PKG3055 | E-Plex 5x00 Series Installation Instructions Exit | 06/2014 |
| PKG3140 | E-Plex 5x00 Series Installation Instructions 1 Mortise | 08/2012 |
| PKG3113 | E-Plex Hardwire Remote Unlock Installation Instructions | 08/2017 |
Manuals
| Document ID | Description | Last Updated |
| PKG3221 | E-Plex 30xx/50xx Series Quick Reference Guide | 02/2013 |
| PKG3221F | E-Plex 3000/5000 Series Summary of Commands for Configuration - French | 11/2016 |
| PKG3219 | E-Plex 30xx/50xx Series Operational Manual | 02/2014 |
Technical bulletin
| Document ID | Description | Last Updated |
| PKG3137 | E-Plex 5x00 Privacy with Thumbturn addendum | 08/2015 |
How To Videos
How to add or modify a user's access code
How to change the master user's access code
How to add or modify a user access code - E-Plex 5200
How to Hard Reset when the Master Code is unknown
How to Hard Reset when the Master Code is known
How to Hard Reset (Old Method)
How to install the battery pack and cover of an E-Plex 5000 Series lock
How to install the outside lever or knob
Care and Maintenance
Important Information
Before using any cleaning or disinfecting product, please take the following steps:
• Only use products that are recommended for the intended surfaces - particularly on plastic surfaces, especially when using alcohol-based cleaning agents
• Always visit the website of the cleaning product manufacturer for a list of specific properties or instruction guidelines
• Pay special attention to plastic surfaces with a gloss finish as these may be more susceptible to scratching or tarnishing
• We strongly recommend first testing any new product on a small surface and waiting for a period of 4 hours to ensure there is no detrimental effect
Extreme Conditions
For locks with Ocean Front finish, we also recommend regular cleaning and waxing.
• On a weekly basis, remove salt from the lock using a damp cloth. This is for area subject to salt mist.
• We recommend cleaning, polishing and waxing locks using a suitable polisher agent every 6 months and this should be adjusted according to the severity of the environment.
Lock Finish warranty
The standard warranty on the dormakaba lock includes the finish, subject to the conditions mentioned above being met.