E-Plex 3000Specifications, Series Templates, Instructions and manuals |
Specifications
| Document | Last Updated |
| E-Plex 3000/5000 Series CSI Specifications | 06/2014 |
Templates
| Template ID | Description | Last Updated |
| 64783b | E-Plex 3x00 Series Deadlock Template | 02/2007 |
| 64782a | E-Plex 3x00 Series Deadlatch Template | 02/2007 |
Instructions
| Document ID | Description | Last Updated |
| PKG3215 | E-Plex 3x00 Series Installation Instructions | 02/2014 |
| PKG3113 | E-Plex 3x00 Hardwire Remote Unlock Installation Instructions | 08/2017 |
Manuals
| Document ID | Description | Last Updated |
| PKG3221 | E-Plex 30xx/50xx Series Quick Reference Guide | 02/2013 |
| PKG3221F | E-Plex 3000/5000 Series Summary of Commands for Configuration - French | 11/2016 |
| PKG3219 | E-Plex 30xx/50xx Series Operational Manual | 02/2014 |
How To Videos
- How to add or modify a user's access code
- How to change the master user's access code
- How to add or modify a user access code - E-Plex 3200
- How to Hard Reset when the Master Code is unknown
- How to Hard Reset when the Master Code is known
- How to Hard Reset (Old Method)
Care and Maintenance
Important Information
Before using any cleaning or disinfecting product, please take the following steps:
• Only use products that are recommended for the intended surfaces - particularly on plastic surfaces, especially when using alcohol-based cleaning agents
• Always visit the website of the cleaning product manufacturer for a list of specific properties or instruction guidelines
• Pay special attention to plastic surfaces with a gloss finish as these may be more susceptible to scratching or tarnishing
• We strongly recommend first testing any new product on a small surface and waiting for a period of 4 hours to ensure there is no detrimental effect
Extreme Conditions
For locks with Ocean Front finish, we also recommend regular cleaning and waxing.
• On a weekly basis, remove salt from the lock using a damp cloth. This is for area subject to salt mist.
• We recommend cleaning, polishing and waxing locks using a suitable polisher agent every 6 months and this should be adjusted according to the severity of the environment.