How to de-activate access user credentials in E-Plex 36xx/37xx/56xx/57xx Series Locks?

Question

How to de-activate access user credentials in E-Plex 36xx/37xx/56xx/57xx Series Locks?

Answer

An Access user’s credential can be de-activated (rather than deleted) if required, for example during her/his vacation temporarily; or return, can then be easily re-activated as described in activate access user credentials.

Required User Level: Master

1. Put the lock into “LearnLokTM” Pushbutton Programming Mode -> # Master PIN #
2. Enter Command 300# to re-activate an Access user’s credential; you do not need this person’s PIN and/or card to do this.
3. Enter this user’s ID location (001 through 300); we will use the ID location 023 in this example. 
   Enter a last # to indicate the end of programming. 
   Example of Complete Entry for user ID=023: 
   300#023# #. 
   You have now activated this Access user’s credential which was temporarily de-activated