How to activate manager user credential in E-Plex 36xx/37xx/56xx/57xx Series Locks?

Question

How to activate manager user credential in E-Plex 36xx/37xx/56xx/57xx Series Locks?

Answer

A Manager user’s credential should be re-activated if it had been de-activated earlier - the procedure is very similar to the above procedure of activating an Access user.

Required User Level: Master

1. Put the lock into “LearnLokTM” Pushbutton Programming Mode.
2. Enter Command 301# to re-activate a Manager user’s credential; you do not need this person’s PIN and/or card to do this.
3. Enter this user’s ID location (001 through 300); we will use the ID location 015 in this example. 
   Enter a last # to indicate the end of programming. 
   Example of Complete Entry for user ID=015: 
   301#015# #. 
   You have now activated this Manager user’s credential which was temporarily de-activated.