How to De-activate Service user access codes in E-Plex 30xx/50xx?

Question

How to De-activate Service user access codes in E-Plex 30xx/50xx?

Answer

A Service User Access Code should be de-activated for a certain time period - during a Service User’s absence, for example.

Required User Level: Master, Manager

1. Put the lock into Pushbutton Programming Mode.
2. Enter Command 402# to de-activate a Manager Access Code.
3. Enter the code 402#NNN#, where NNN is the specific Manager ID location, 024 for example.
4. Example of complete entry: 402#025#.
5. Enter another # to indicate the end of programming.
6. You have now de-activated a Service User Access Code