How to activate/de-activate passage mode in E-Plex 30xx/50xx?

Question

How to activate/de-activate passage mode in E-Plex 30xx/50xx?

Answer

You have already programmed a default duration for a door to remain in Passage Mode - Procedure 5, Program the Duration of the Passage Mode Period, on page 9. When you activate Passage Mode, it becomes enabled for the duration you have set in Procedure 5. 

If your length is 6 hours, and you activate Passage Mode at 1:00, it will automatically re-lock at 7:00. Even if the lock was taken in and out of Passage Mode multiple times during the six hour period, it will still re-lock after six hours (programmable) from the original starting period. This ensures that a lock will never remain in Passage Mode beyond the programmed time period of 1 to 24 hours.

Required User Level: Master, Manager

1. Put the lock into Pushbutton Programming Mode.
2. Enter Command 399# to activate / de-activate Passage Mode.
3. Enter the code where 1 = activate Passage Mode and 0 = de-activate Passage Mode.
4. Example of Complete Entry to activate Passage Mode 399#1#
5. Enter another # to indicate the end of programming.
6. You have now activated Passage Mode on the door.
7. Example of complete Entry to de-activate passage mode 399#0##, anytime before the passage mode expiry time.