How to activate user access codes in E-Plex 30xx/50xx?

Question

How to activate user access codes in E-Plex 30xx/50xx?

Answer

A User Code should be activated if it has been de-activated for a certain time period - during a user’s vacation, for example. User Codes that are inactive, but might be needed some time in the future, should be de-activated rather than deleted.

Required User Level: Master, Manager

1. Put the lock into Pushbutton Programming Mode.
2. Enter Command 300# to activate a User Code.
3. Enter the ID location NNN #, where NNN is the specific User ID location, 023 for example.
4. Example of complete entry: 300 #023#.
5. Enter another # to indicate the end of programming.
6. You have now activated the User Access Code assigned to 023.