States of Operation in ComboGard Pro 39E Electronic Combination Lock

The ComboGard Pro Lock has three states of operation: Factory Default, Manual Setup, and Active. 
ComboGard Pro locks are shipped from LA GARD in Factory Default state without Users or features enabled. Refer to the ComboGard Pro Setup Instructions (731.018) if Lock settings have not already been programmed.

Factory Default 

The Lock must be in the Factory Default state to be programmed by the PC software. Factory mode functions as follows: 

• 1 key – When pressed, will open the Lock.
• 0 key – When pressed, prompts the ComboGard Pro 
  Setup software to send the configuration settings to the 
  Lock. OR if pressed and held, places the Lock into Manual Setup.
• All other keys perform no function.

Setup

The lock can be configured using ComboGard Pro Setup software or by using the keypad only.

Active

To activate the Lock and freeze the configuration, the Manager combination MUST be changed.