Change Combination in LA GARD 3125 Electronic Entry Device

Steps to change your combination

Note: Always perform this operation with the door open

1. Enter existing code and hold down the last digit until unit double signals twice and the LED stays on. If eKEY is set up, enter existing combination, then insert and hold eKEY until unit double signals twice and the LED stays on.
2. Press the “0” key.
3. Enter your NEW combination two times (and insert eKEY, if set up).
4. If a mistake is made wait thirty (30) seconds and repeat steps 1 - 3.
5. Test lock operation several times before closing the door.

CAUTION: When selecting a combination do not use birthday or other predictable data that could give correlation between the user and combination. Keep the combination secret.

• Valid Combination Entry - Double signal after valid combination is entered.
• Invalid Combination Entry - Triple signal indicates the old combination is still valid.