Changing Batteries in LA GARD 3000 Electronic Entry Device
Steps to change batteries
Small Battery Box:
- Slide the keypad housing up and carefully pull away from mounting surface to expose battery compartment.
- Remove the old 9-Volt alkaline battery.
- Remove the connector by unsnapping it from the two terminals on the top of the battery.
CAUTION! Hold onto battery terminal connector to avoid pulling the wires out of housing.
- Repeat procedure for second battery.
- Carefully position the keypad over the mounting screws and slide the keypad housing down. Ensure there are no wires or cables trapped between the input pad and the safe door. Pinched cables can result in a short circuit.
Mounting Instructions available at www.kaba-mas.com.