LOCK OPERATIONS - CHANGE COMBINATION Manager and User in LA GARD Basic 3802 Firmware

NOTE: Each combination must be changed independently at the Lock. New combination will not be accepted if it varies from the current combination by only one digit (+/-). When selecting a combination, do not use a birthday or other predictable information that could give correlation between the user and the combination.

CAUTION: Always perform this operation with the door open, and test the opening of the Lock with the new combination several times before closing the door

Steps to change combination for user types: Manager and User

1. Enter zero [0] six times. Ex. (0-0-0-0-0-0)
2. Enter an existing combination. Ex. (1-2-3-4-5-6)
3. Enter the NEW combination. Ex. (6-5-4-3-2-1)

4. Re-enter the NEW combination to confirm Ex. (6-5-4-3-2-1)

   The NEW combination is now active.

5. Test lock operation several times before closing the door.