Open the Lock in LA GARD Mechanical 4 Wheel Locks

Question

How to Open the Lock in LA GARD Mechanical 4 Wheel Locks?

Answer

Opening the lock – Using the OPENING INDEX 
The lock is shipped with the factory combination of 50. To open, turn dial to the LEFT passing 50 at least five times then stop when 50 lines-up with the OPENING Index. Turn RIGHT until dial stops, this will retract the bolt.

To open the lock using a set combination, for EXAMPLE 10-20-30-40, use the following procedures:

Using the OPENING Index (see Figure 1)

1. Turn the dial to the LEFT (counter-clockwise) at least five complete rotations to clear the lock; the lock is now ready to accept the combination. Never spin the dial to clear the lock.
2. Using the OPENING index, turn the dial RIGHT (clockwise) passing the first number in the combination [10] four times. Then stop exactly on the number [10] the fifth time.
3. Turn the dial LEFT (counter-clockwise) passing the next number in the combination [20] three times. Then stop exactly on the number [20] the fourth time.
4. Turn the dial RIGHT (clockwise) passing the next number in the combination [30] twice. Then stop exactly on the number [30] the third time.
5. Turn the dial LEFT (counter-clockwise) passing the last number in the combination [40] one time. Then stop exactly on the number [40] the second time.
6. Turn the dial to the RIGHT (clockwise) to open the lock. The lock bolt is fully retracted when the dial no longer turns right.

To lock the combination lock, turn the dial five complete rotations to the LEFT.