E-Plex 7900 Instructions |
Templates
| Document ID | Description | Last Updated |
Cylindrical | ||
| DT-514989 | E7900 Drillling Template Cylindrical Unit 2-3/4" Backset |
09/2017 |
| DT-514990 | E7900 Drilling Template Cylindrical Unit 2-3/8" Backset |
09/2017 |
| IP-514990 | E7900 Drilling Door Prep Drawing Cylindrical Unit 2-3/8" Backset |
09/2017 |
Mortise | ||
| DT-514986 | E7900 Lock Series Drilling Template Mortise ASM 1 Face Plate |
09/2017 |
| IP-514986 | E-7900 Lock Series Door Preparation Drawing Mortise ASM 1 Face Plate |
09/2017 |
| DT-514985 | E7900 Lock Series Drilling Template Mortise ASM 1-1/4 Face Plate |
09/2017 |
| IP-514985 | E7900 Lock Series Door Preparation Drawing Mortise ASM 1-1/4 Face Plate |
09/2017 |
| DT-514987 | E7900 Drilling Template Mortise ESM 20mm Face Plate |
09/2015 |
| DT-514988 | E7900 Drilling Template Mortise ESM 23mm Face Plate |
09/2015 |
Exit Trim | ||
| DT-516400 | E7900 Lock Series Drilling Template ARROW- S1908/S3908/S1708/S1708/S1808/S3808 |
09/2018 |
| DT-516408 | E7900 Lock Series Drilling Template ARROW- S3888/S3788 |
09/2018 |
| DT-516409 | E7900 Lock Series Drilling Template Corbin Russwin - ED5200/ED5400 Yale - 7100/7170 |
09/2018 |
| DT-516414 | E7900 Lock Series Drilling Template Detex V40 |
09/2018 |
| DT-516413 | E7900 Lock Series Drilling Template Dorma 9100/F9100/9100FL/F9100FL |
09/2018 |
| DT-516402 | E7900 Lock Series Drilling Template Dorma 9300/F9300/9400/F9400 |
09/2018 |
| DT-516417 | E7900 Lock Series Drilling Template Dorma9500/F9500 |
09/2018 |
| DT-516410 | E7900 Lock Series Drilling Template Hagar 4500 |
09/2018 |
| DT-516416 | E7900 Lock Series Drilling Template Sargent 8710F |
09/2018 |
| DT-516401 | E7900 Lock Series Drilling Template Detex - 10/F10/20/F20 Von Duprin - 98/99/9827/9927 Precision 21/F21/22/F22 |
09/2018 |
| DT-516407 | E7900 Lock Series Drilling Template Von Duprin 9875/9975 |
09/2018 |
| DT-516412 | E7900 Lock Series Drilling Template Von Duprin 9847/9947 |
09/2018 |
| DT-516411 | E7900 Drilling Template Yale 7160 |
09/2018 |
Instructions
| Document ID | Description | Last Updated |
| KD10114 | E-Plex 7900 Installation Instructions | 04/2024 |
| PK3677 | Exit Device Operators - 630/750/79E/RT/E7900 Series/ Generation E-730 - Installation Instructions | 04/2024 |
How To Videos
How to install free Keyscan LUNA Software
How to add a lock to Keyscan LUNA Software
How to create and assign schedules to Keyscan LUNA Software
How to assign access levels in Keyscan LUNA Software
How to create a master user in Keyscan LUNA Software
How to create user and assign a credential in Keyscan LUNA Software
How to create and download a .dat file from Keyscan LUNA Software
E-PLEX 7900 Installation Videos on YouTube
Care and Maintenance
Important Information
Before using any cleaning or disinfecting product, please take the following steps:
• Only use products that are recommended for the intended surfaces - particularly on plastic surfaces, especially when using alcohol-based cleaning agents
• Always visit the website of the cleaning product manufacturer for a list of specific properties or instruction guidelines
• Pay special attention to plastic surfaces with a gloss finish as these may be more susceptible to scratching or tarnishing
• We strongly recommend first testing any new product on a small surface and waiting for a period of 4 hours to ensure there is no detrimental effect
Extreme Conditions
For locks with Ocean Front finish, we also recommend regular cleaning and waxing.
• On a weekly basis, remove salt from the lock using a damp cloth. This is for area subject to salt mist.
• We recommend cleaning, polishing and waxing locks using a suitable polisher agent every 6 months and this should be adjusted according to the severity of the environment.
Lock Finish warranty
The standard warranty on the dormakaba lock includes the finish, subject to the conditions mentioned above being met.