How to Activate to Bank Mode from Factory (Shelved) Mode in Cencon ATM Security Lock

Activation from Factory Mode to Bank Mode

1. Initialize Lock and Enter Factory Combination

   Step	Action
   Power up lock	Turn dial CCW until EC is displayed
   EC	Enter 50-25-50
   OPR	Turn dial CW to open lock and retract bolt
   Insert Change Key	Insert the change key into the lock
   Extend Bolt	Extend the bolt to secure the lock

2. Initialize Bank Mode and Activate SA Key

   Step	Action
   Power left	Turn dial CCW until £EC appears, then enter 50-25-50
   ISA	Insert and hold the RED SA KEY in the reader
   INI	Lock is initializing
   POC	Remove the RED SA KEY and pull out the change key
   OPR	Turn dial CW to retract bolt
   Extend Bolt	Extend the bolt to secure the lock

Applies To

Cencon Lock (Swing Bolt)