How to Activate from from FLM mode to route mode in Cencon ATM Security lock (Swing Bolt)

Activation from FLM Mode to Route Mode – Swing Bolt

1. Authenticate in FLM Mode and Open the Lock

   Step	Action
   Power up	Turn the dial to power up the lock.
   EC	Enter the FLM combination.
   IPI	Insert the BLUE FLM KEY into the reader.
   OPR	Turn the dial right to retract the bolt.
   Open	Open the door.

2. Initialize Lock Using Security Administrator (SA) Key

   Step	Action
   Power	Turn the dial until CLB appears.
   CLB	Enter #50.
   ISA	Insert and hold the RED SA KEY in the reader.
   INI	The lock initializes.
   EOP	Extend the bolt while keeping the door open.

3. Record FLM Close Seal

   Step	Action
   IPI	Insert the BLUE FLM KEY into the reader.
   C00	Record and report the Close Seal.

4. Activate Route Mode

   Step	Action
   Power	Turn the dial to power the lock.
   EC	Enter the Route activation combination.
   IPI	Insert the YELLOW ROUTE KEY into the reader.
   OPR	Retract the bolt.
   Extend	Extend the bolt.

5. Record Route Mode Close Seal

   Step	Action
   IPI	Insert the YELLOW ROUTE KEY into the reader.
   C00	Record and report the Close Seal.

Applies To

Cencon Lock (Swing Bolt)