How to Activate from factory to FLM and/or route modes in Cencon ATM Security lock (Swing bolt)

Activation from Factory Mode to FLM and/or Route Modes

1. Initial Power-Up

   Step	Action
   Power	Turn the dial to power up the lock.
   EC	Enter 50-25-50.
   OPR	Turn the dial to the right to retract the bolt.
   Open	Open the door.

2. SA Key Initialization

   Step	Action
   Power	Turn the dial until CLB appears.
   CLB	Enter #50.
   ISA	Insert and hold the RED SA KEY in the reader.
   INI	The lock initializes.
   EOP	Extend the bolt while keeping the door open.

3. Mode Activation

   Step	Action
   Power	Enter the activation combination.
   EC	Enter the activation combination.
   IPI	Insert the BLUE FLM KEY or YELLOW ROUTE KEY into the reader.
   OPR	Retract the bolt.
   Extend	Extend the bolt.
   IPI	Insert the BLUE FLM KEY or YELLOW ROUTE KEY into the reader.
   C00	Record and report the Close Seal.

Applies To

Cencon Lock (Swing Bolt)