How to Activate from route mode to FLM mode in Cencon ATM Security lock

Activation from route mode to FLM mode 

1. Initialize Lock and Enter Route Combination

   Step	Action
   Power up lock	Turn the dial to power up the lock.
   EC	Enter ROUTE combination.
   IPI	Insert the YELLOW ROUTE KEY in the reader.
   OPR	Open right to retract bolt.
   Insert	The change key.
   Extend	The bolt.

2. Insert RED SA Key and Initialize Lock

   Step	Action
   Power left	Lock until £EC appears.
   £EC	Enter 50 25 50.
   ISA	Insert and hold the RED SA KEY to the reader.
   INI	Lock is initializing.
   POC	Remove the RED SA KEY, pull out the change key.
   OPR	Open right to retract bolt.
   Extend	The bolt.

3. Record Close Seal for Route Mode

   Step	Action
   IPI	Insert the YELLOW ROUTE KEY in the reader.
   C00	Record and report the close seal.

4. Activate FLM Mode

   Step	Action
   EC	Enter the FLM activation combo.
   IPI	Insert the BLUE FLM KEY in the reader.
   OPR	Retract the bolt.
   Extend	The bolt.
   Power	Lock until IPI appears.
   IPI	Insert the BLUE FLM KEY in the reader.
   C00	Record and report the close seal.

Applies To

Cencon Lock (Swing Bolt)