How to change your Bank Mode combination on a Cencon lock in Bank Mode.

Required Items: 

• Teal (Green) Key
• User’s Combination     

Steps                     

1. Power up Lock by turning Dial CCW until EC is displayed.
2. Press #8. IPI is displayed. 
3. Insert and hold green Key in Key Reader. EcC is displayed. 
4. Enter current Combination. EnC is displayed. 
5. Enter new Combination. CnC is displayed. 
6. Enter new Combination again for verification. EOP is displayed. 

Note: If a flashing Lightning Bolt displays, the Combination was not confirmed properly. Reset by pressing * and re-key operation

Applies To

Cencon Gen2 Lock