How to Open or Close Lock in Bank Mode of the Cencon Gen2 system?

Required Items:

None

Steps                             

1. Power up Lock by turning Dial CCW until EC is displayed.
2. Enter User’s Combination. IPI is displayed. 
3. Insert and hold the green Key in the Key Reader until OPr is displayed. 
4. Turn Dial CW to open Lock. 
5. Open Door. 
6. Perform Service or Route Operations. 
7. Close Door. 
8. Turn Dial CCW to close Lock. IPI is displayed. 
9. Insert and hold B Key in Key Reader until EOP is displayed.

Applies To

Cencon Gen2 Lock