How to Shelve Lock in Bank Mode of the Cencon Gen2 system?

Required Items

• B Key
• SA Key
• Change Key
• User’s Combination

Steps

1. Power up Lock by turning Dial CCW until EC is displayed.

2. Enter User’s Combination. IPI is displayed. 

3. Insert and hold User’s B Key in Key Reader until OPR is displayed. 

4. Turn Dial CW to open Lock. 

5. Open Door. 

6. Insert Change Key into Change Key Socket. 

7. Do not close door. Turn Dial CCW to close Lock until EC is displayed. 

8. Enter Factory Combination 50-25-50. ISA is displayed. 

9. Insert and hold SA Key in Key Reader while SHL is displayed.

Applies To

Cencon Gen2 Lock