How to Change Initial Bank User Combination to Valid Combination in the Cencon Gen2 system?

Required Items

• B Key    

Procedure             

1. Power up Lock by turning Dial CCW until EC is displayed. 

2. Enter Factory Combination 50-25-50. 

• IPI is displayed. 

3. Insert and hold B Key in Key Reader.

• EnC is displayed. 

4. Enter new combination. 

• CnC is displayed. 

5. Enter new combination again for verification. 

• EOP is displayed.

Note: If a flashing Lightning Bolt displays, the combination was not confirmed properly. Reset by pressing * and re-key operation.

Applies To

Cencon Gen2