How to Activate Lock in Bank Mode from Factory Mode in the Cencon Gen2 system

Required Items

• Change Key  
• SA Key

Activation Procedure

1. Power up the lock by turning the dial counterclockwise (CCW) until "EC" is displayed.
2. Enter the factory combination 50-25-50. "OPr" is displayed.
3. Turn the dial clockwise (CW) to open the lock.
4. Open the door.
5. Insert the Change Key into the Change Key Socket.
6. Do not close the door. Turn the dial CCW to close the lock until "EC" is displayed.
7. Enter the factory combination 50-25-50. "ISA" is displayed.
8. Insert and hold the SA Key in the key reader while "INI" is displayed.
9. Continue to hold the SA Key and turn the dial CCW until "POC" is displayed.
10. Pull out the Change Key. "OPr" is displayed.
11. Turn the dial CW to open the lock.
12. Close the door.
13. Turn the dial CCW to close the lock completely.

Applies To

Cencon Gen2 Lock