How do I Activate Lock in Route mode (Already in FLM mode) Cencon Gen2 system Lock

Required Items

• R Key

• 

  F Key

• Change Key
• SA Key
• Service Call Combination
• Activation Combination

Activation Procedure

1. Power up the lock by turning the dial CCW until "EC" is displayed.
2. Enter the FLM Service Call Combination. "IPI" is displayed.
3. Insert and hold the F or R Key in the key reader until "OPr" is displayed.
4. Turn the dial CW to open the lock.
5. Open the door.
6. Insert the Change Key into the Change Key Socket.
7. Do not close the door. Turn the dial CCW until "EC" is displayed.
8. Enter the Factory Combination 50-25-50. "ISA" is displayed.
9. Insert and hold the SA Key in the key reader until "POC" is displayed.
10. Pull out the Change Key. "OPr" is displayed.
11. Turn the dial CW to open the lock.
12. Do not close the door. Turn the dial CCW until "IPI" is displayed.
13. Insert and hold the F Key in the key reader until "Close Seal" is displayed.
14. Record the FLM Service Call Close Seal.
15. Turn the dial CCW until "EC" is displayed.
16. Enter the Route Activation Combination. "IPI" is displayed.
17. Insert and hold the R Key in the key reader until "OPr" is displayed.
18. Turn the dial CW to open the lock.
19. Close the door.
20. Turn the dial CCW until "IPI" is displayed.
21. Insert and hold the R Key in the key reader until "Close Seal" is displayed.
22. Record the Route Activation Close Seal.
23. Report all Close Seals to the Dispatcher(s).

Applies To

Cencon 2 Lock