How to open and close lock for Service call or route visit in the Cencon Gen2 system Lock?

Required Items

• F or R Key
• Service or Route Combination

Steps

1. Power Up Lock by turning dial CCW until EC is displayed.
2. Enter Service or Route Combination. IPI is displayed.
3. Insert and hold F or R Key in Key Reader until OPr is displayed.
4. Turn Dial CW to open Lock.
5. Open door.
6. Perform Service or Route Operations.
7. Close Door.
8. Turn Dial CCW to close Lock until IPI is displayed.
9. Insert and hold F or R Key in Key Reader until Close Seal is displayed.
10. Record Close Seal.
11. Report Close Seal to Dispatcher.

Applies To

Cencon Gen2 lock