Question How do I Shelve the Cencon Gen2 system Lock? |
Answer Required Items: F or R Key, Change Key, SA Key, Shelve Combination 1. Power Up Lock by turning dial CCW until EC is displayed. 2. Enter Shelve Combination. IPI is displayed. 3. Insert and hold F or R Key in Key Reader until OPr is displayed. 4. Turn Dial CW to open Lock. 5. Open door 6. Insert Change Key into Change Key Socket. 7. Do not close door. Turn Dial CCW to close Lock until 8. Enter Factory Combination 50-25-50. ISA is displayed. 9. Insert and hold SA Key in Key Reader until POC is displayed. 10. Pull out Change Key. OPr is displayed. 11. Turn Dial CW to open Lock. 12. Close Door. 13. Turn Dial CCW to close Lock until IPI is displayed. 14. Insert and hold F or R Key in Key Reader until Close Seal is displayed. 15. Record Close Seal. 16. Report Close Seal to Dispatcher. 17. Return SA Key to Dispatcher for Shelve Verification. **To shelve a Lock in FLM Mode, use an FLM Key. |