How do I activate the lock in FLM mode for the Cencon Gen2 system

Required Items

• R Key

• 

  F Key

• Change Key
• SA Key
• Service Call Combination
• Activation Combination

Activation Procedure

1. Power up the lock by turning the dial CCW until "EC" is displayed.
2. Enter the FLM Service Call Combination. "IPI" is displayed.
3. Insert and hold the F or R Key in the key reader until "OPr" is displayed.
4. Turn the dial CW to open the lock.
5. Open the door.
6. Insert the Change Key into the Change Key Socket.
7. Do not close the door. Turn the dial CCW until "EC" is displayed.
8. Enter the Factory Combination 50-25-50. "ISA" is displayed.
9. Insert and hold the SA Key in the key reader until "POC" is displayed.
10. Pull out the Change Key. "OPr" is displayed.
11. Turn the dial CW to open the lock.
12. Do not close the door. Turn the dial CCW until "IPI" is displayed.
13. Insert and hold the F Key in the key reader until "Close Seal" is displayed.
14. Record Route Service Call Close Seal. 
15. Turn Dial CCW until "EC" is displayed. 
16. Enter FLM Activation Combination. "IPI" is displayed. 
17. Insert and hold F Key in Key Reader until "OPr" is displayed. 
18. Turn Dial CW to Open Lock. 
19. Close Door. 
20. Turn Dial CCW to close Lock until "IPI" is displayed. 
21. Insert and hold F Key in Key Reader until "Close Seal" is displayed. 
22. Record FLM Activation Close Seal. 
23. Report Close Seals to Dispatcher(s).

Applies To

Cencon 2 Lock