How to retrieve Lock Audit Count in Cencon Gen2 System

Question

How to retrieve Lock Audit Count in Cencon Gen2 System?

Answer
 

Required Items: F or R Key

1. Power up Lock by turning dial CCW until EC is displayed. 

2. Press ## on Lock Keypad. IPI is displayed. 

3. Insert and hold F or R key in Key Reader. SC is displayed followed by a four digit Audit Count, two digits at a time. 

4. Press * to clear Display. 

**To Retrieve Audit Count for FLM Mode, use an FLM Key.

 **To Retrieve Audit Count for Route Mode, use a Route Key.