Instructions

How to Videos

• How to install the Cencon Gen 2 Lock - Attach the Lock Case (Step 1 of 5)
• How to install the Cencon Gen 2 Lock - Install the Front Cover (Step 2 of 5)
• How to install the Cencon Gen 2 Lock - Dial Installation (Part 1) (Step 3 of 5)
• How to install the Cencon Gen 2 Lock - Installation Checklist (Step 4 of 5)
• How to install the Cencon Gen 2 Lock - Dial Installation (Part 2) (Step 5 of 5)
• How to Reset the Re-lock Trigger

Care and Maintenance

Important Information

 Before using any cleaning or disinfecting product, please take the following steps: 

• Only use products that are recommended for the intended surfaces - particularly on plastic surfaces, especially when using alcohol-based cleaning agents 

• Always visit the website of the cleaning product manufacturer for a list of specific properties or instruction guidelines 

• Pay special attention to plastic surfaces with a gloss finish as these may be more susceptible to scratching or tarnishing 

• We strongly recommend first testing any new product on a small surface and waiting for a period of 4 hours to ensure there is no detrimental effect

Extreme Conditions 

For locks with Ocean Front finish, we also recommend regular cleaning and waxing. 

• On a weekly basis, remove salt from the lock using a damp cloth. This is for area subject to salt mist. 

• We recommend cleaning, polishing and waxing locks using a suitable polisher agent every 6 months and this should be adjusted according to the severity of the environment.