What are the common error codes in Cencon

Question

What are the common error codes in Cencon?

Answer

Firstly, the engineer needs to retrieve the audit count from the lock. The process is to power the lock up:

• 03: Wrong serial number on key or information not on red SA key, wrong factory combination, mode is already active
• 06: The lock is active in a mode which the key is not authorised to access
• 0A: The lock was In the closed state when the change key was entered

• 07 Bad key contact or bad key ErA Customer did a #50 but the bolt isn’t retracted all the way 

  : (Lightning bolt only) wrong code