RT PlusTemplates and Installation Instructions(Compatible with Community) |
Templates
Click on the template ID of the template you wish to download.
Please note that these templates are labeled for the 660, 660i, 760, 770, 790, 76, 79,
E-PLEX 2000, POWER-PLEX 2000 & E-PLEX 7900 lock series. The RT Plus has the same footprint.
| Template ID | Description | Rev | Last Update |
|
Cylindrical |
|||
| RT Plus Cylindrical 2-3/4" Backset Drilling Template |
2 | 9/20/2017 | |
| DT-514990 | RT Plus Cylindrical 2-3/8" Backset Drilling Template |
2 | 9/20/2017 |
| Mortise | |||
| DT-514985 | RT Plus Mortise ASM 1-1/4" Face Plate Drilling Template |
2 | 9/20/2017 |
| IP-514985 | RT Plus Mortise ASM 1-1/4" Face Plate Door Preparation Template |
2 | 9/20/2017 |
| DT-514986 | RT Plus Mortise ASM 1" Face Plate Drilling Template |
2 | 9/20/2017 |
| IP-514986 | RT Plus Mortise ASM 1" Face Plate Door Preparation Template |
2 | 9/20/2017 |
| Panic Trim | |||
| IP-513067 | RT Plus Panic Trim Yale Rim 7100/SVR 7170 & Corbin Russwin Rim ED5200/SVR ED5400 |
4 | 02/17/2009 |
| IP-513067 | RT Plus Panic Trim Yale 7100/ SVR 7170 Corbin Russwin Rim EDED52100/SVR ED5400 |
4 | 01/17/2009 |
| IP-513066 | RT Plus Panic Trim Yale Trim Concealed Rod 7160 |
3 | 01/17/2009 |
Instructions
| Template ID | Description | Rev | Last Update |
| PK3720 | Saflock RT/RT Plus Installation Manual | T | 09/2022 |
| PK3677 | Saflock RT/RT Plus Exit Installation Manual | T | 09/2018 |
How to Videos
Unboxing and Installing the RT Cylindrical
Unboxing and Installing the RT Mortise
Care and Maintenance
Important Information
Before using any cleaning or disinfecting product, please take the following steps:
• Only use products that are recommended for the intended surfaces - particularly on plastic surfaces, especially when using alcohol-based cleaning agents
• Always visit the website of the cleaning product manufacturer for a list of specific properties or instruction guidelines
• Pay special attention to plastic surfaces with a gloss finish as these may be more susceptible to scratching or tarnishing
• We strongly recommend first testing any new product on a small surface and waiting for a period of 4 hours to ensure there is no detrimental effect
Extreme Conditions
For locks with Ocean Front finish, we also recommend regular cleaning and waxing.
• On a weekly basis, remove salt from the lock using a damp cloth. This is for area subject to salt mist.
• We recommend cleaning, polishing and waxing locks using a suitable polisher agent every 6 months and this should be adjusted according to the severity of the environment.
Lock Finish warranty
The standard warranty on the dormakaba lock includes the finish, subject to the conditions mentioned above being met.
Click here to download the Electronic Lock Cleaning Fact Sheet