What does the Device Configuration of USB Communication screen include in Axessor Apexx Software

Question

What does the Device Configuration of USB Communication screen include in Axessor Apexx Software?

Answer

The Device Configuration screen contains a list of all system devices and allows you to configure all device-specific settings via software.

All devices in the lock system are listed under "Devices" at the top of the screen. You can sort your devices in ascending or descending order by clicking any of the headings in the list. A blue arrow will appear above the respective heading indicating the direction in which the devices have been sorted ().

To view the configuration details of any device, simply click a device from the list. The Device Configuration details for each device type are described below:

• "Lock" Details
  • Name - enter a name into this field for Lock identification purposes
  • Bank Opening Dual Mode - Use the drop-down menu to select one of the following options.
    • "Not Enabled"
    • "Any 2"
  • Schedule - Use the drop-down list to select one of the available Schedules or leave unassigned.
  • Opening Time Delay - If a Time Delay has been applied to the lock, the Opening Time Delay is the period of time between when a valid credential is received at the keypad and when the lock can be accessed. Once this delay period is over, the Confirmation Window begins. The Opening Time Delay can be given a value anywhere from 0-minutes (disabled) to 4-hours 15-minutes. Use the drop-down menu to set this value in hours/minutes.
  • Duress Opening Time Delay - this is similar to Opening Time Delay but is utilized when Duress is enabled. Use the drop-down menu to set this value in hours/minutes.
  • Remote Disabled - When a signal is sent to the lock using a lock input configured for this feature, the lock cannot be opened. Enable/disable the Remote Disabled feature by clicking this slider. This feature is enabled when the slider is blue and to the right .